FDA Approved Syringe Infusion Pump

Model NO.: 600I Infusion Pump
Trademark: MeCan
Origin: Guangzhou China
FDA approved syringe infusion pump 
600I Infusion Pump

600I  meet all the basic requirements for general use

Features of  pump
Innovative door-free design for easy operation
Middle Detection and Ultrasound Detectors to double guarantee the correct IV set loading
Anti-bolus system to reduce significantly bolus after occlusion sudden release
Reminder alarm in case of forgetting to start the operation
High speed infusion up to 600ml/h satisfies special clinical scenario
Optional drip sensor and fluid heater
Wireless data transmission with infusion supervision system

Technical Specifications of infusion pump
Mechanism                  Peristaltic pump
Operating Mode              Flow Rate Mode, Drop rate Mode (optional)
Preset Volume               1-9999 ml
Accumulated Infusion Volume   1-9999 ml
Flow Rate Range              1 - 600 ml/h
Increment                   1, 10, 100 (ml/h)
Accuracy                     ± 5%
KVO Rate                    1 ml/h
Bolus Rate                   600 ml/h
Drop rate range               1 - 400 drop/min with optional Drip Sensor

Display of volumetric infusion pump
Screen             2.7 inch B/W LCD
Information         Flow Rate and unit, Preset Volume and unit, Accumulated infusion volume and unit, Finish, Occlusion, Air Bubble, Bed No., AC Power indicator, Battery capacity, Battery charge indicator, IV set, etc.
Status Indicator      Stop, Run, Bolus, KVO

Alarm Type
Air Bubble, Finish, Occlusion, No AC Power, Low Battery, Battery Empty, Reminder to operate, Errors, Handle opened
Air Bubble Level:1-3 levels adjustable, turn off
Occlusion Alarm Pressure Range:3 levels:70kPa, 100kPa, 130kPa (±30kPa), Level Low as default

Battery
Type              Lithium polymer battery
Life              Up to 2 hours continuous operation@25 ml/h flow rate with standard battery(1 hour for 600IB)

Environment
Temperature         5 - 40 ºC for operating, -20 - 50 ºC for storage
Air Pressure         86 - 106 kPa for operating, 50 - 106 kPa for storage
Humidity            20 % - 80 % for operating, 10 % - 95 % for storage
Others
Classification        Class II, Type BF
Dimension          120 mm(L) × 140 mm(D) × 195 mm(H)
Weight             Approximately 1.7 kg
Power Supply       100 - 240 VAC, 50/60 Hz
Waterproof level    IP21


 

Clear Flex Tape

Flex Clear Tape,Clear Flex Tape,Flex Seal Clear Tape,Clear Flex Seal Tape

Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytapes.com

Posted on