Semi-automatic baler considerations

When I first started to contact the baler , many of my friends didn't get it so fast. Some dangerous places didn't notice. He was a machine faster than the man, so there was a lot of attention. I hope the following instructions can help you!

Precautions for the use of semi-automatic balers .

1. The grounding of the semi-automatic baler power supply should meet the requirements, and the grounding pin on the power plug of the machine cannot be removed, otherwise electric shock will occur.

2. After the upper cover and left and right doors of the semi-automatic strapping machine are opened, the operator cannot touch the running parts of the machine by hand and disconnect the power before opening.

3. When the baler is powered on, do not touch the electrical part of the machine and the part of the electric steel sheet.

4. Communicate with the manufacturer when using it in a corrosive and dusty environment and test if it is available.

5. When packing easily damaged items, be sure to adjust the tightening force not too large. If there are liquid leakage or dust leakage, it should not be placed directly on the equipment for packaging work.

6. Generally speaking, the environmental conditions for the normal use of semi-automatic balers are between -20 and 50 degrees.

7. When the operator is packing, do not put the head and hands into the ring of the packing belt to avoid injury.