The pheasant's fattening stage is from 8 weeks old to 16-18 weeks old, at which stage the pheasant weight rises linearly. 1. Appropriate feeding of raw grains can be used to properly increase the proportion of corn, sorghum and other energy feeds (recommended formula: corn 40%, wheat 15%, fried peas 20%, rapeseed cake 15%, wheat Bran 5%, rice bran 4%, bone meal 1%, another 25 kg of salt and appropriate amount of trace elements per ton of material); purchase of chicken feed, can be purchased broiler growth feed. Ensure sufficient drinking water, in addition to add 10% -20% of green feed. At least once a week sand bath, spray 2% trichlorfon solution in the sand to kill ectoparasites. 2. Control the initial density (5-11 weeks old) and raise 10-12 animals per square meter. Afterwards, groups can be reared in groups of males and females, strengths and weaknesses, and their density can be gradually reduced to 6-8 per square meter. At the same time, enough troughs should be set up for even feeding. 3, set up habitats, flood control. Inside and outside of the fattening hen house should be placed in habitats for the pheasants to stop. This will not only make full use of the breeding space, but will also help to reduce embarrassment. In high-density feeding, pheasants are prone to feathering and licking. If a pheasant with a bruise is found, it should be proposed and a purple lotion or camphor ointment should be applied to the wound to keep it in isolation. Regulate the pheasant if necessary: ​​(1) hung grass or vegetables in the house to lure the pheasant leeks and disperse the energy of their feathers, supplemented with vitamins and cellulose; (2) at 9-11 weeks of age , can add 1% of the feather powder in the feed; (3) increase the salt in the feed to 25%, or add salt in drinking water, and ensure adequate water supply. 4. Anti-suspected flight. Keep quiet as much as possible and decline to visit to reduce the influence of external factors. In order to prevent a startled flight or a crash, the primary fly feather on one side of the pheasant can be cut off; the construction of the screen house should not be too high. 5, do a good job of epidemic prevention. The broiler house should be cleaned every day, and weekly sterilizers should be disinfected with 100 toxins and other disinfectants. At 8 to 9 weeks of age, Newcastle disease vaccines were inoculated with water. If wet and rainy weather occurs during fattening, 004% oxytetracycline or other antibiotics should be added to the feed to prevent the occurrence of fowl cholera or coccidiosis. Generally, it takes 1 week for the drug to be administered, and 1 week for 1 week before it can be achieved. The purpose of prevention.
Medical Consumables
Medical consumables and equipment's are the most used regularly at the hospitals/laboratories.
including Medical Vacuum Safety Needle,Glucose Tube,Grey Glucose Tube,Blood Taking Collection Safety Needle etc.
As the top rank manufacturer of non-vacuum blood collection tubes on both quality
and quantity in China, Xinle has more than enough capacity in design, develop and
manufacture tubes according to customer specific requirement at a cost that's
rarely available anywhere else.
The disposable peripheral safety blood lancet is composed of out shell, trigger, plastic handle, spring, back cover and
protective cap. The needle body is made of Ocr18Ni9 stainless steel wire, and the spring is made of carbon spring steel
wire or stainless steel wire. The back cover is made of PE plastic, the shell is made of ABS or PP plastic, and the other
injection parts are made of ABS plastic.
01 - Purchase of raw materials
The company's purchase of raw materials shall be caried out in accordance with the company's "raw material purchase
requirements document", and the purchased raw materials shall be strictly inspected.
02 - Product inspection
In the process of production, the product shall be subject to one hour sampling inspection, and the finished product shall be
subject to sampling inspection and sample retention by batch, so that the batch can be traced.
03 - Product sterilization
This product is sterilized by iradiation of cobalt 60 or epoxy 2-alkane, so as to achieve complete sterilization without residue,
longer warranty period and more safety.
04 - Product salient features
Beautiful appearance, comfortable grip, one-piece injection molding of needle body, exposed air of needle plutonium, avoid-
ing pollution of rabbit needle body, three section design of needle iron, small force, spring
With the new design, the puncture time is only 0.3 seconds, and the patient's pain is lower. The blood collection needle
adopts self destruct device, after blood collection, the needle body quickly retracts and locks up, the iron is not exposed,
which effectively protects Protect the safety of medical staff.
Medical Consumables,Medical Vacuum Safety Needle,Glucose Tube,Grey Glucose Tube,Blood Taking Collection Safety Needle
Changchun ZYF science and technology CO.,LTD , https://www.zyf-medical.com