High-voltage wind chassis unit structure and fan friction

This high-pressure wind-carrying unit adopts a frame and box-plate assembly design, in which the frame is formed by one-time stretching of an advanced metal cold-bending forming unit, and the box plate is a double-plate structure, and is disposed in the inner layer. Acoustic material further reduces noise. The impeller is all moulded and is a multi-leaf wing forward impeller, which has the characteristics of high efficiency, low noise, large air volume, stable operation, stable quality and durability.

The microbial contamination point in the purification unit must be controlled. Because the structure, temperature and humidity are more suitable for the growth of microorganisms such as bacteria, the cabinet, filter, muffler and humidifier of the purification unit become potential microbial contamination points. Take control. If the unit cabinet should be free from damage, rust, disinfection, heat preservation and sealing performance, use antibacterial materials such as those widely used in refrigerators; filter performance indicators meet the requirements, muffler, humidifier, etc. do not retain condensables The unit is often cleaned or disinfected.

The equipment also has different classifications, but the basic form is high-pressure fan, which can be directly connected to the air duct or installed on the floor. The installation form can be directly horizontally installed and hoisted. However, it should be noted that if the floor installation is used, a shock absorption system needs to be installed to ensure the normal operation of the fan.

Friction is a common problem that many equipments can produce. Severe friction will not only damage the equipment, but also affect its performance. Therefore, Zui has to find a way to avoid it.

First, the structure of the device can be appropriately improved. In contrast, the two-stage structure can obtain a higher degree of vacuum, thereby playing a significant role in improving friction. In order to improve the wear resistance of the high-pressure blower, the change of the material may also be effective. For example, the replacement of the traditional material by the polymer composite repair material can not only reduce the friction to a certain extent, but also in the case of a small wear size. And it will not have a big impact on mechanical properties.

After the zui, you can start by reducing the shock of the device, as long as the vibration can be reduced, the friction of the product can naturally be reduced.