1. Check whether the power supply voltage is consistent with the specifications provided on the machine nameplate. The power supply must have a reliable ground wire. When pulling the plug, grasp the entire plug and pull it out. Do not pull the power cable only to avoid internal disconnection and poor contact.
2. The motor should not be operated for a long time without load or overloaded at low speed and blocked, so as to avoid excessive temperature rise.
3. If the sealing performance of the device is found to be degraded, please check the seal loss in the device and clean and maintain the parts frequently.
4. When installing and using the glass instrument, it should be in direct contact with metal or hard objects. Care should be taken to avoid damage to the glass. After use, it should be cleaned for reuse.
5, CNC bath in any case (except for products with automatic water shutoff protection) can not be cut off and dry, the water surface must be immersed above the sensor.
6. When installing the instrument, the machine should be placed on a stable and stable workbench close to the water source. If there is unevenness, it should be adjusted first to avoid resonance and accident due to the unevenness of the workbench. The fasteners on each component are not easy to be screwed tightly. Just fine.
2. The motor should not be operated for a long time without load or overloaded at low speed and blocked, so as to avoid excessive temperature rise.
3. If the sealing performance of the device is found to be degraded, please check the seal loss in the device and clean and maintain the parts frequently.
4. When installing and using the glass instrument, it should be in direct contact with metal or hard objects. Care should be taken to avoid damage to the glass. After use, it should be cleaned for reuse.
5, CNC bath in any case (except for products with automatic water shutoff protection) can not be cut off and dry, the water surface must be immersed above the sensor.
6. When installing the instrument, the machine should be placed on a stable and stable workbench close to the water source. If there is unevenness, it should be adjusted first to avoid resonance and accident due to the unevenness of the workbench. The fasteners on each component are not easy to be screwed tightly. Just fine.
Royal Jelly is also called Bee Milk. The fresh royal jelly is slightly ropy milk paste substance; it is the excretive mixture of nutrition gland and maxilla gland of the head of little worker bee. The worker bees use this to feed the 1-3 days` worker bee larva and drone larva, 1-5.5 days` queen bee larva and queen bee in the oviposition period. The royal jelly is the biologic product containing very complicated active elements which contains almost all the nutrition elements required by the growth of the human body.
Royal Jelly
Royal Jelly,Natural Royal Jelly,Healthy Royal Jelly,Organic Fresh Royal Jelly
Easy Food (Jiaxing) Co., Ltd. , https://www.jxeasyfood.com