Model NO.: X2
Wavelength Range: 385 - 515 Nm
Light Intensity: > 2300MW / Cm²
Battery: Lithium-Ion Battery
Power: AC 100-240V 50 / 60Hz
Charging Time: About 45 Minutes
Trademark: novo
Transport Package: Box
Specification: 96g
Origin: China
HS Code: 9018499000
X2 LED curing light user manualFor your own safety, please read this user's manual carefully before operation.
Please keep this User Manual in a place that is easy to pick and place for easy viewing.
[product manual]
Optimum Polymerization Cure is an important requirement for all photocurable materials to meet stable and high quality repairs. The choice of light curing machine plays a decisive role. therefore, Thank you for purchasing our light curing machine. It has been designed according to the latest technology and related industry standards and is a high quality medical device. The manual will help you to be safe.
Moving equipment, make full use of its function to ensure the service life. If you have any further questions, do not hesitate to contact us (see address on the back page).
Warning: The intensity of the curing machine can cause heat build-up around the tip of the equipment. Use the user should be extra careful to prevent the use of direct contact with the skin, oral mucosa or gums touch. This equipment is for professional use only.
[Package Contents]
1 × host handle; 1 × charging base; 1 × power adapter; 1 × user manual.
[Features]
1. Curing Machine With its broad-spectrum blue-violet light (385 -Â 515 nm) emitted by its "High Power Wide Spectrum LED," it is possible to cure all the dental light curing materials and adhesives Glue in the market.
2. Fast charge, 45 minutes, can fully charge the battery;
3. vibration tips, replace the traditional buzzer sound;
4. memory function, can automatically save the light curing machine last use data.
Operation and function description
The entire handle is only one button, light built-in button.
1. For the first time, charge the light curing handle first. Plug the USB cable of the charger into the USB port of the power adapter, plug the power adapter into the power socket, and finally
Put the handle on the charging stand; or, insert the USB cable plug of the charging stand into the USB port of the computer, and then put the handle on the charging stand. Charging instructions are as follows:
| Emerald Flashing |Â Battery charging;
| Emerald green light |Â battery fully charged; handle removed the charging seat, the restoration of the previous working mode.
2. Working mode selection, by pressing the button for 2Â seconds to release to switch the working mode.
| Blinking Blue | Progressive mode, working time 10 seconds, light intensity 0-5 seconds from 0-1200mW / cm², 5-10 seconds 1200mW / cm².
| Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm ²
3. Turn the light curing lamp on and off, press the button briefly.
4. Switch machine, in standby mode, press the button a short time to open the instrument; stop any operation for 60 seconds, into the ultra-low power standby.
5 low battery tips:
At power-on |Â Red on for 3Â seconds, Operating mode on for 7Â seconds |Â Battery needs charging but still works;
In standby mode, press the button once |Â red steady 10 seconds |Â The battery needs to be charged to use the instrument.
- Vibration Tips:
b. Press the button to activate the handle, a short vibration;
c. Press the button to activate the handle, a short vibration;
d. press the button to turn on the lights; continuous short vibration twice;
e. Press the button to turn off the light or time to turn off the lights, long vibration once;
f. Press the key to turn on the lights, shock once every five seconds;
g. automatically sleep, short continuous vibration three times;
[Safety]
1. The photocuring machine must be operated strictly in accordance with the "User Manual" and the Company shall not be liable for any damages whatsoever arising out of the use of this equipment for any other purpose.
2. The exposure must be limited to the oral area where clinical treatment is planned.
3. Only use the original charger, power adapter and battery. Use of third party accessories may result in damage to the equipment and possible damage to the user /Â patient.
4. Do not allow detergent to enter the device directly, which may cause premature damage.
5. Only the company company personnel can repair the equipment. If you have any questions, please call the company's after-sales service department or contact your dealer.
6. Never be used in patients with a history of photopheresis such as solar urticaria or erythropoietic porphyria or in patients undergoing photosensitization.
7. In use, patients and dentists are advised to wear suitable blue filter goggles.
[Maintenance and care]
When not in use, please set the light curing machine on the charging stand. Please pay attention to keep the light curing machine tail and charging needle clean and dry.
Recommended disinfectants are: • ≤ 3.4% glutaraldehyde solution; • 70% isopropanol; • 1.5% phenol; • Ethanol (25 to 50% strength); • Quaternary amines.
Be careful not to get wet inside the equipment.
Avoid contact with iodine-based solutions and detergents containing dimethyl ammonium chloride.
[Disposal]
Please dispose of used batteries with waste equipment according to the relevant state laws and regulations. Please contact your local waste disposal contractor.
[Warranty]
The Company warrants that the photocuring machine will be free from defects in materials and workmanship if used properly within 12 months from the date of purchase. In this 12-month warranty period. Our Company will repair or replace any defective equipment.
For other questions, comments or for product information, please call the company's after-sales service or dealer.
Damage caused by misuse, negligence, accident or abuse is beyond the scope of this warranty.
[Technical Parameters]
Light Source: Broad Band LED; Wavelength Range: 385 - 515 nm; Light Intensity:> 2300mW / cm²;
Battery: Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes);
Power Adapter Input Power: AC 100-240V 50 /Â 60Hz;
Charging time: about 45 minutes;
size:
Handle: Φ20 mm × 240 mm; Charging stand: Φ63 mm × 30 mm (all of the above are the largest size)
weight:
Handle: 96 grams; Charging seat: 99 grams;
Operating ambient temperature: + 10 ° C - + 40 ° C (+ 50 ° F - + 70 ° F);
Operating relative humidity: 30% -Â 75%;
Operating environment pressure: 700hPa -Â 1060hPa;
Storage and transportation Ambient temperature: -20 ºC - +40 ºC (+50 ºF - +70 ºF);
Storage and transport relative humidity: 10% -Â 90%;
Storage and transportation Ambient pressure: 500hPa -Â 1060hPa.
Â
| Contact Information: | |
| Novo Export Limited | |
| Mobile | +86 189 2646 6077 |
| Whats'app | +86 189 2646 6077 |
| Â | Â |
| Web | www.dental-novo.com |
Â
|
Product Name |
Goji Berry Powder |
|
|
Appearance |
Orange-yellow or orange color powder |
|
|
Item |
Standard |
|
|
Physics & Chemical Characteristic |
Moisture (%) |
≤5.0 |
|
Smell |
No Peculiar Smells |
|
|
Total Sugar (% As glucose) |
≥20.0 |
|
|
Ash (%) |
≤6.0 |
|
|
Microorganism Characteristics |
Bacterium total (cfu/g) |
≤1000 |
|
Yeast (cfu/g) |
≤50 |
|
|
Mould (cfu/g) |
≤50 |
|
|
Corliform (MPN/100g) |
≤40 |
|
|
Pathogenic Bacteria (cfu/ml) |
ND |
|
|
Package |
5kg in aseptic bag, and two bags per paper carton |
|
|
Storage |
Normal temperature for 24 months. |
|
Goji Berry Halal Powder,Goji Freeze-Dried Powder,Organic Fresh Goji Powder,Freeze Organic Goji Powder
NINGXIA LOVE GOJI SUPPLY CHAIN CORPORATION , http://www.gojiscm.com