How to clean the automatic capsule filling machine

The automatic capsule filling machine integrates machine, electricity and gas into one, adopts microcomputer programmable controller, touch panel operation, frequency conversion speed regulation, equipped with electronic automatic counting device, the machine is sensitive in action, accurate filling dose, novel structure and beautiful appearance. It is easy to operate and can automatically complete the action of in place, separation, filling and locking of the capsule, reduce labor intensity, improve production efficiency and meet pharmaceutical hygiene requirements. Suitable for filling a variety of domestic or imported capsules. It is an economical and practical equipment for filling capsule medicines in the pharmaceutical industry.

First, the frequency of cleaning: 1 after the end of each batch of production; 2 continuous production after the end of each shift; 3 before production, after production cleaning, disinfection; 4 must be cleaned when changing varieties, specifications, batch number; 5 equipment must be thoroughly cleaned after maintenance ,disinfection.

Second, cleaning tools: clean non-filament cloth, vacuum cleaner, brush, cleaning basin and so on.

Third, detergents and disinfectants: drinking water, purified water, 75% ethanol.

Fourth, the cleaning method: according to the first remove and then wash, first inside and outside, first zero and then in the order:

1) Cleaning steps for the same variety: 1 first clean the residual powder in the powder filling device module with a vacuum cleaner; 2 remove the powder punch, metering tray, powder hopper, get to the washing room, rinse with drinking water Once again, rinse with purified water and dry with a dry rag. Wipe and disinfect with a rag with 75% ethanol; 3 parts of the device that are in direct contact with the drug, wipe with clean water, dry with a dry rag, and wipe with a rag with 75% ethanol; 4 glass shield and The surface of the equipment is cleaned with purified water; 5 clean the site, after passing the inspection, hang the “cleaned” status mark; 6 fill in the cleaning record.

2) Cleaning procedure for replacement varieties: In addition to the cleaning steps for the same variety, the following work should be done: 1 Remove the capsule barrel and capsule funnel, take it to the cleaning room, rinse it with purified water, and dry it with a dry rag. Finally, wipe it with a rag with 75% ethanol; 2 scrub the cam holder movable holder with a rag, then scrub with purified water, dry it with a dry rag, and wipe it with a rag with 75% ethanol.

V. Evaluation of cleaning effect: The appearance of the whole machine is smooth and clean. Wipe all parts of the device with a clean white rag. There are no spots, stains, or traces of residue on the rag.