*, using vapor pressure, do not exceed the rated working pressure for a long time.
Secondly, the inlet valve should be slowly opened when entering the steam until the pressure is required. The shut-off valve at the outlet of the condensate should be opened if the steam trap is installed. If there is no steam trap, open the valve first. When there is a vapor overflow, close the valve and keep it open until a small amount of water vapor overflows.
Third, the safety valve can be adjusted according to the pressure of the user's own steam.
Fourth, the steam boiler should always pay attention to the change of vapor pressure during use, and adjust it with steam inlet valve.
Fifth, after stopping the intake air, the straight nozzle cock at the bottom of the pot should be opened and the remaining water should be drained.
Sixth, tilting and stirring type sandwich pots should be refueled at each rotating part before each shift; the parts on the body surface of the stirring type sandwich pot are recommended to use cooked vegetable oil; other places are 30#--40# Machinery oil.
Maintenance :
1. The steam inlet pipe and the outlet pipe joint are leaking. When the tightening nut does not solve the problem, the packing should be added or replaced.
2. Pressure gauges and safety valves should be inspected regularly, and replaced and repaired in case of failure.
3. After the gearbox starts to be used for 50 hours, it should be removed and drained. Rinse with kerosene or diesel oil. Add 30#--40# clean engine oil. After 150 hours, change the oil for the second time. Change oil every 1000 hours or so.
4, anti-rust oil peeling, should be painted in time, painted outside the paint, it is recommended to use X55-3 aluminum powder ethylene water-resistant paint. 5. After 5 years of use of the steam sandwich pot, it is recommended to carry out the safety hydraulic pressure test. The interval between the subsequent hydraulic pressure tests shall be carried out according to the requirements of the local technical departments.
6. The outer layer of the steam sandwich pot is made of steel plate of 4.0~5.5 mm thick, steel No. A3. When the outer pot is thinned to less than 2mm after years of rust, it should be stopped.
7. Welding of stainless steel steam sandwich pot stainless steel and stainless steel other steel joints should be made of stainless steel welding rods 102, Austria 107, Austria 132, Austria 137, other grades should not be used.
Children's 3D three-dimensional mask winter boy child mouth and earmuffs, children's three-dimensional upgraded version, specially designed for children, clean and tidy, hygienic and non-allergic, choose the size without worry, and fit the baby's face. The soft, high-elastic and wide earbands make it more comfortable for children to wear for a long time. To minimize the burden on the ears, the thicker the mask for the delicate child, the better. For children, the breathing force is small, and the high-permeability and low-resistance material is used to make breathing smoother. Professional customization can effectively block bacteria, saliva, dust and other pollutants.
Professional 3D Children Mask manufacturer is located in China, including Face Mask Respirator ,3D Disposable Children Face Mask,3D 5 Layers Activated Carbon Face Mask, etc.
3D Children Mask,Face Mask Respirator ,3D Disposable Children Face Mask,3D 5 Layers Activated Carbon Face Mask
KUTA TECHNOLOGY INDUSTRY CO.,LIMITED , https://www.kutasureblue.com