Safety net impact through test machine operation method
Article from Qingdao Zhongbang Instrument Co., Ltd. Technology Department
Safety net impact runs through the test machine before the test preparation
1. Place the test bench and control box in place and connect the electrical box power supply and the electric hoist power supply.
2. Prepare the test sample and put it in place as required by the standard.
Safety net impact runs through the testing machine
    Safety net impact test:
1. Connect the power to the electrical control box.
Use the up and down buttons on the panel to lower the electromagnetic release device to the bottom, press "release" to hang the test ball, press the "suck" lock, and then press the "up" button to lift, for safety reasons. Do not be too tall, and do not stand under the test ball for subsequent operations.
2. Place the sample in place:
The sample is tied to the (6m*3m) frame of the lower shelf by the tether around the sample. Note: When tethering, the force of each tether should be as uniform as possible.
3. Adjust the position of the test ball to the zero position of the test on the test side of the test. Press ↠on the height gauge to return to zero. When the test ball reaches the set test height, it automatically stops rising.
(Test ball test height setting method: press and hold until the P1 appears, press to enter the parameter setting state, for example, 01.200 is the stop height when the height is 1.2 meters. Combine the button to adjust the test height. Press to store the set parameters. Press until you return to the measurement state. Do not change other parameters when setting this parameter!!!)
(In the same way, the Fi parameter can be fine-tuned so that the displayed value of the meter corresponds to the actual boost value!)
4. Press the “Release†button to test the ball to fall. One trial is completed;
Observe the sample and record the result;
If you continue the test, repeat the above steps. If not, turn off the power and protect the corresponding devices from rain and protection.
Safety net penetration test:
1. Place the electromagnetic release part through the electric hoist to the position where the test rod is conveniently placed.
2. Use the electromagnetic release part to hung the test rod through the wire rope, then press the “push-in†button to pull the test rod, and then use the electric hoist to raise the electromagnetic release part together with the test rod to a height of 1 m from the center of the net.
3. Press the “Release†button and the test stick will fall vertically in a free fall.
Check the condition of the sample being tested, record the test results, and complete one test.
Safety net impact throughout the test machine operation precautions
1. The release device is energized and released, and the power is disconnected. It is strictly prohibited to be released for a long time!
2. Pay attention to the rain and snow protection of all devices, especially electrical components.
3. The test bench must be fixed firmly. A test pit with soft sand must be placed under the test ball.
4. For safety reasons, the test ball is suspended and the operator is prohibited from standing under the test ball! It is strictly forbidden to reach under the test stick during the test!
5. During the test, please do not let the idlers wait around the test stand to walk around.
This article is an article of Qingdao Zhongbang Instrument Co., Ltd. If you need to reprint, you must add the source of the description, and you will be responsible for reprinting without permission.
What's red light therapy? Red light therapy before and after
Red light therapy (RLT) is a treatment that may aid in the healing of skin, muscle tissue, and other body components. It exposes you to red or near-infrared light at modest intensities. Infrared light is a sort of energy that your eyes cannot see but which your body perceives as heat. Red light is comparable to infrared light, however it is visible.
Low-level laser treatment (LLLT), low-power laser therapy (LPLT), and photobiomodulation are all terms for red light therapy (PBM).
What Is Red Light Therapy and How Does It Work?
Red light treatment involves exposing your skin to a red-light bulb, gadget, or laser. Mitochondria, also known as the "power generators" of your cells, absorb it and use it to produce additional energy. This, according to some scientists, helps cells repair themselves and grow healthier. This promotes skin and muscular tissue repair.
The skin is not injured or burned by red light treatment since it employs very low amounts of heat. It is not the same sort of light used in tanning salons, and it does not expose your skin to UV rays that are harmful to your skin.
What Is It Used For?
Red light treatment has been studied for a long time. However, there aren't many research on it, and no one knows if it's better than other sorts of healing treatments. The use of red light therapy may be beneficial in the following situations:
Dementia. People with dementia who received near-infrared light treatment on their heads and via their nostrils on a daily basis for 12 weeks had improved memory, slept better, and were less irritable.
Pain in the teeth. People with temporomandibular dysfunction syndrome (TMD) experienced decreased discomfort, clicking, and jaw soreness after receiving red light treatment, according to another small study.
Hair loss is a common occurrence. In one research, men and women with androgenetic alopecia (a hereditary condition that causes hair loss) gained thicker hair after using an at-home RLT device for 24 weeks. The outcomes were not the same for those who utilized a bogus RLT gadget in the trial.
Osteoarthritis. According to one research, red and infrared light treatment reduced osteoarthritis-related pain by more than half.
Tendinitis. RLT appears to reduce inflammation and discomfort in persons with Achilles tendonitis, according to a small trial of seven participants.
Wrinkles and other symptoms of aging and damage to the skin. RLT has been shown in studies to aid with wrinkles and skin smoothing. RLT can also assist with acne scars, burns, and sun damage indications.
What Are the Consequences?
Even though experts aren't clear how or why red light treatment works, it's usually thought to be safe. There are also no hard and fast guidelines on how much light to use. Too much light can harm skin tissue, while too little can make it less effective.
What Is Red Light Therapy and Where Can You Get It?
At most cases, it's done in a doctor's office. Some salons and dentistry clinics, however, do it as well. You may also purchase a red light treatment gadget on your own. Side effects and injuries are more likely to occur with salon and at-home treatments. If you're considering red light treatment, see your doctor first.
red light therapy benefits,red led light therapy,led light therapy,best red light therapy,infrared light therapy,red light therapy near me,red light therapy device,blue and red light therapy
Shenzhen Guangyang Zhongkang Technology Co., Ltd. , https://www.szlighttherapymachine.com