Causes and treatment methods of hydraulic system of touch screen emulsifying machine

Causes and treatment methods of hydraulic system of touch screen emulsifying machine

The hydraulic system is often used in the lifting function configuration of the touch screen emulsifier. It is generally used for large-scale emulsified mixing tanks. In the valley mechanical touch screen emulsifier, the emulsification equipment of the platform type large emulsifier above 250L will be emulsified by the hydraulic lifting system. The lifting system of the mixing tank. Sometimes, for some reasons, the hydraulic system is faulty, what is the cause of the malfunction of the touch screen emulsifier hydraulic system?

It is understood that in the hydraulic system failure of the touch screen emulsifying machine equipment, most of the faults are caused by the hydraulic oil, and generally caused by the impurities of the hydraulic oil. If the equipment hydraulic oil fails, you can mainly check the following points:

1. First, you can check the cleanliness, color, viscosity and consistency of the hydraulic oil. In addition, you can smell the smell.

2. In most high-speed touch screen emulsifier systems, the relief valve is the main source of heat. In addition, the flow through the pressure reducing valve is too large, which is another major cause of heat generation.

3. Regularly check the oil temperature in the fuel tank to prevent serious damage from occurring and to eliminate it before the system malfunctions.

4. If the temperature of the hydraulic oil is too high, the seal will deteriorate and the oil will oxidize to failure, which will cause corrosion and deposits, which will block the wear of the orifice and the accelerating valve. Excessive temperature will cause the valve and pump to become stuck. High temperatures can also pose safety issues.

5. When the hydraulic oil of the touch screen emulsifier flows from the high pressure side to the low pressure side without mechanical work, heat is generated in the hydraulic system.