Daily maintenance and maintenance methods for high platform ball valves

Daily maintenance and maintenance methods for high platform ball valves

The daily maintenance and maintenance method of the high-platform ball valve, the high-platform ball valve is mainly used to cut and change the flow direction of the medium in daily life. The ball valve switch is small in size and convenient, and all aspects of performance are tested. After winning the customer The trust that comes with it is widely used in various industries. The consumption is also faster, and of course the daily maintenance is also kept up, otherwise the work efficiency is reduced, the maintenance time is increased, and the cost is increased. Want to let the high-platform ball valve run for a long time, how to operate it in daily maintenance?

Pay attention to the place where it is stored. It should not be stored in the open air for a long time. This will cause the valve to rust and not work properly. In the storage environment, choose a place that is protected from rain, water, and moisture. If it is a valve that is stored for a long time, be sure to take it out regularly to check its condition. Before using the high-platform ball valve, pay attention to whether there are foreign objects such as impurities in the pipe, and if necessary, clean it thoroughly. If there is a slight leak in the packing during use, you can slightly tighten the stem nut and stop it until the leak stops. Do not continue tightening. After using the high-platform ball valve, it should be cleaned. The cleaning agent used should not be chemically reacted with it. After washing, it should be dried and stored.

The operation of rotating the 90-degree high platform ball valve can be tightly closed, which is a kind of resistance that is completely equal. The medium is considered to be a direct use method through a small circulation, and is designed as a development stainless steel ball valve for its control flow. While selecting a stainless steel ball valve, the whole is also a combination type.

It is usually applied to water, solvent and acid natural gas. It is designed by hydrogen peroxide through general medium and applicable working condition medium. The whole combination form, the working principle is smooth and light, and the volume is small compared with the seal which can be made into a large diameter. Reliable, high platform ball valve construction is also relatively simple. It can be used in a wide range of industries by eroding the medium under normal conditions.

The above is the daily maintenance of the high-platform ball valve, to ensure that the high-platform ball valve can be used for a long time.