Dryer's instruction manual Do not put flammable materials in the dry box of the dry box without explosion-proof installation.
After each use, the power supply must be partially cut off, often insisting that the inside and outside of the box is clean.
Before use, it is necessary to pay attention to whether the power supply voltage used can be met. When using, it is necessary to stop the grounding of the power socket grounding according to the rules.
When using the power supply, avoid touching the electrical parts in the space on the left side of the box with a hand or wipe it with a damp cloth and water. The power should be cut off during the inspection.
The power cord should not be wrapped around metal objects. It should not be placed in the center of low temperature or humidity to avoid leakage of rubber due to aging.
Do not over-extrude the contents of the box, and leave room for natural convection in the atmosphere, so that the humid atmosphere can decelerate on the wind top.
It should reflect the silver contact of the temperature conditioner in the current period whether it can be hairy or uneven. If it is, use the fine gauze to level the contact, then use it, and always wipe it with a clean cloth to make it contact well (note that the power must be cut off) ). Do not impact the metal piping of the indoor temperature conditioner to avoid the flexibility.
The drying oven warms up normally and the fan does not turn. The drying oven is warming up normally, indicating that the input mains is normal. If the fan does not turn, you should find the components and parts related to the motor. First check whether the fuse of the dry box fuse RD is blown, whether the connecting wire is open; capacitor C:, whether the terminals of the motor are loose or desoldered, then remove the lead wire of the dry box capacitor from the terminal of the motor, with a multimeter Check for leaks or breakdowns. If the fault is still not ruled out after the above check, the motor may be faulty, remove the dry box motor for inspection, repair or replacement. If there are other problems, Suzhou Huayu Purification Equipment Co., Ltd.
JIANGSU CLS TECHNOLOGY CORP.LTD , https://www.js-cls.com