The alcohol recovery tower suitable for dilute alcohol recovery in the pharmaceutical, food, light industry, chemical and other industries consists of six parts: tower kettle, tower body, condenser, cooler, buffer tank and high storage tank. The equipment is partially made of stainless steel SUS304 or SUS316L, which has good corrosion resistance and energy saving, environmental protection, low production cost and high efficiency. The device can distill the dilute alcohol of 30 degrees to 50 degrees to 93 degrees to 95 degrees, and the residual liquid discharge has low alcohol content, and meets the environmental protection requirements. The device adopts high-efficiency stainless steel corrugated packing, and the contact materials of the alcohol recovery tower are all made of stainless steel. Matte treatment on the outer surface of the equipment, in line with GMP medical regulations.
With a temperature slightly above the boiling point of alcohol, the working principle of the alcohol recovery tower uses the principle that the boiling point of alcohol is lower than the boiling point of other solutions. The dilute alcohol solution to be recovered is heated and volatilized, and after the tower body is finely smelted, pure alcohol gas is precipitated to increase the concentration of the alcohol solution, thereby achieving the purpose of recovering alcohol. The alcohol recovery tower is suitable for the pharmaceutical, food, light industry, chemical and other industries. Dilute alcohol recovery. Also suitable for distillation of other coal-soluble products such as methanol. The alcohol recovery tower cools the ethanol gas with circulating cooling water and condenses to obtain recovered ethanol. Of course, it is not possible to condense all at once, or to connect several recovery towers in series, or to condense them in sections inside the tower and recycle them in sections. If it is an absorption tower, it depends on whether ethanol is absorbed or not. Because ethanol is a product or a concomitant product, the condensation point of the organic substance can be utilized, and condensation is carried out at different temperatures to obtain different products.
1000Hz High Frequency LiDAR System
JRT High Frequency Range LiDAR Sensor is 2021 new product, that's a low-cost tof sensor but High frequency (up to 1000Hz). With 5cm high accuracy, the LiDAR Module can measure 80m.
Why the 1000Hz High Frequency LiDAR System:
* Widely used in many industrial automation system, like, UAV, delivery van, anti-lock break system, construction automation,intelligent toy robots etc.
* Small size: 43*35*21mm, can be easily integrated
* Invisible laser design: the laser type is 905nm,Class I
* High Frequency: 1000hz/1khz
* Low power design
Chengdu JRT Main Ranging Modules: Industrial Laser Distance Sensor, Laser Distance Meter Module, Tof LiDAR Sensor.
lidar sensor,tof sensor,lidar system
Chengdu JRT Meter Technology Co., Ltd , https://www.rangingsensor.com