The Chinese medicine pulverizer is suitable for small Chinese medicine factories, Chinese medicine shops, Chinese medicine hospitals, and is also suitable for chemical, mining and scientific research units. The machine has high work efficiency and simple operation. The fineness of the product is up to 200 mesh, which is more effective for crushing the easy-to-bond, expensive Chinese medicine which is usually difficult to crush.
Precautions
1. Check if there is any foreign matter in the crushing chamber (it must be empty before starting) and turn on the power.
2. Tighten the upper cap and the butterfly nut of the crushing chamber.
3. Start the motor, rotate the machine for 1-2 minutes, then gradually feed the material from the feeding tray. The feeding should not be too fast.
4. If the material is stuck and the motor does not turn, please turn it off immediately to avoid burning the motor. After the material is removed, you can continue to use it.
5. It is strictly forbidden to open the upper cover and reach into the crushing chamber by hand during the use.
6. This machine is a dry pulverizer. It is not suitable to smash wet and greasy materials.
7. Please change the screen according to your needs.
8. This machine adopts overheat protector. If the motor load is too large, it will stop automatically. If you continue to operate, please press the protector again.
9. During the working process of this machine, the current should not exceed 15 amps.
Precautions
1. Check if there is any foreign matter in the crushing chamber (it must be empty before starting) and turn on the power.
2. Tighten the upper cap and the butterfly nut of the crushing chamber.
3. Start the motor, rotate the machine for 1-2 minutes, then gradually feed the material from the feeding tray. The feeding should not be too fast.
4. If the material is stuck and the motor does not turn, please turn it off immediately to avoid burning the motor. After the material is removed, you can continue to use it.
5. It is strictly forbidden to open the upper cover and reach into the crushing chamber by hand during the use.
6. This machine is a dry pulverizer. It is not suitable to smash wet and greasy materials.
7. Please change the screen according to your needs.
8. This machine adopts overheat protector. If the motor load is too large, it will stop automatically. If you continue to operate, please press the protector again.
9. During the working process of this machine, the current should not exceed 15 amps.
JRT usb interface distance sensor board adds a USB port to a Laser Distance Sensor, inexpensive laser distance measurement sensors, allowing customers directly using GBeacon-2.3-Fx.exe software to control the rangefinder sensor. Usb laser distance sensors are the the most popular model devices, it works by measuring the phase of an visible-red laser beam that reflects on the target. Usually, customers would like to choose CH341SER.EXE version to test.
USB Laser Distance Sensor,Distance Sensor,Laser Distance Sensor,Distance Measurement Sensors
Chengdu JRT Meter Technology Co., Ltd , https://www.infrareddistancesensor.com