1. Extrusion system The extrusion system includes a screw, a barrel, a hopper, a machine head, and a mold. The plastic is plasticized into a uniform melt by an extrusion system, and is continuously continuous by the screw under the pressure established in the process. Extruder head.
(1) Screw: It is the main component of the extruder, which is directly related to the application range and productivity of the extruder, and is made of high-strength and corrosion-resistant alloy steel.
(2) Barrel: It is a metal cylinder, which is generally made of alloy steel with high heat resistance, high compressive strength, strong wear resistance and corrosion resistance or composite steel pipe lined with alloy steel. The barrel is matched with the screw to achieve pulverization, softening, melting, plasticizing, venting and compacting of the plastic, and continuously and uniformly conveying the rubber to the molding system. The length of the general barrel is 15 to 30 times its diameter, so that the plastic is fully heated and fully plasticized.
(3) Hopper: The bottom of the hopper is equipped with a cutting device to adjust and cut the flow. The side of the hopper is equipped with a sight hole and a calibration metering device.
(4) Handpiece and mold: The machine head is composed of an alloy steel inner sleeve and a carbon steel jacket, and a molding die is arranged in the machine head. The function of the machine head is to transform the rotating plastic melt into a parallel linear motion, which is evenly and smoothly introduced into the mold sleeve and imparts the necessary molding pressure to the plastic. The plastic is plasticized and compacted in the barrel, and the porous filter plate flows into the head forming mold through the neck of the head through a certain flow path, and the core mold sleeve is properly matched to form an annular gap with a decreasing cross section, so that the plastic melt is in the A continuous dense tubular coating is formed around the core. In order to ensure the plastic flow path in the machine head is reasonable, and eliminate the dead angle of the accumulated plastic, a shunt sleeve is often placed. In order to eliminate the pressure fluctuation during plastic extrusion, a pressure equalizing ring is also provided. A mold correction and adjustment device is also mounted on the handpiece to facilitate adjustment and correction of the concentricity of the core and the mold sleeve. In the previous reply, the waste plastic recovered by the pulverized granulation process is first pulverized into granules by a pulverizer, and then granulated by screening and washing.
For waste plastics, the model is generally 30HP or above, and it is also useful for small machines.
Double Arm Electric Medical Pendant
Double Arm Electric Medical Pendant with multi kinds of gas outlet and power socket can be choosed; The ceiling pendant is modular assembly, to make the medical pendant suitable to different environment use; it is inevitable choice for operation theater and ICU room;The pendant is mainly used to place monitor, electric knives and medical instruments needed by general surgery operations. Its bearing weight is more than 120kg. It could provide the necessary medical gas, power for operations with output terminal. It is equipped with all kinds of pluggable, quickly-connecting gas terminals.
Electric Surgical Pendant,Electric Ceiling Pendant,Electric Hospital Pendant,Electric Cavascope Pendant
Shandong Lewin Medical Equipment Co., Ltd. , https://www.lewinmed.com