Simple instructions for using the trap

At present, there are many types of traps used in enterprise equipment, but some specific controls are similar. The following is the basic guide for the use of traps.

1. The large displacement of the trap of the steam trap = the amount of condensed water produced by the steam equipment × the reserve factor; the reserve factor of the drum type drying equipment is 6 to 10, and the reserve factor of other equipment is 2 to 4

2. Working state: (1) The action of the free semi-float trap depends on the amount of condensed water. (2) The free semi-float trap is accompanied by secondary steam (high-temperature condensed water re-evaporates in the atmosphere), which is not leaking steam and is normal.

3. The displacement range refers to the large displacement of the zui of the type of trap between the pressure difference from 0.02 MPa to the standard differential pressure.

4. Can be customized according to the user's special requirements for working pressure difference, condensed water displacement and interface diameter.

KN95 Moulded Mask with valve

KN95 Moulded Mask with valve,High Quality KN95 Moulded Mask with valve,KN95 Moulded Mask with valve Details, CN

Dongguan Maimeng Culture and Creative Co. Ltd , https://www.factorydirectmask.com

Posted on