Main performance and technical parameters
Types of | Inner diameter ( mm ) | Shape ( mm ) width, height, depth |
Ordinary transfer window (width * height * depth) | Inside 400 | 520*480*460 |
Inside 500 | 620*580*560 | |
Inside 600 | 720*680*660 | |
Inside 700 | 820*780*760 | |
Inside 800 | 920*880*860 | |
Within 900 | 1020*980*960 | |
Within 1000 | 1120*1080*1060 | |
280*320*340 | Outside 400 | |
380*420*440 | Outside 500 | |
480*520*540 | Outside 600 | |
540*620*640 | Outside 700 | |
680*720*740 | Outside 800 | |
780*820*840 | Outside 900 | |
880*920*940 | Outside 1000 | |
Self-cleaning transfer window (width * height * depth) Built-in fan and filter | Inside 500 | 620*1000*560 |
Inside 600 | 720*1100*660 | |
Inside 700 | 820*1200*760 |
As an auxiliary equipment of the clean room, it is mainly used for the transmission of small items between the clean area and the clean area, the non-clean area and the clean , transfer window and the clean area, so as to reduce the number of times the clean room is opened. Reduce pollution in clean areas.
Transfer windows are widely used in micro-technologies, biological laboratories, pharmaceutical plants , hospitals, food processing industries, LCDs , electronics factories, and other places where air purification is required. The factors that determine the price of the transfer window are: the material and thickness of the transfer window; the thickness we recommend to use less 1mm thick plate, so as to ensure the firmness of the case, if using thinner plates, during transportation or use It is easy to cause deformation; the plate used should be determined according to the actual situation on site .
The interlocking form of the transfer window is another major factor in determining the price of the transfer window. The choice of the transfer window depends on the details . The welded product is of course judged by the welder's technology . A good welding product , the weld is smooth and flat , showing a fish scale , and the glass glue at the joint between the inner liner and the outer liner is smooth and fine , without breaking the glue. Glue phenomenon . The transfer window handles are made of high-quality materials and are durable . The number of handles opened more than 30,000 times . Good transfer window manufacturers produce a variety of transfer window accessories : such as walkie-talkies , germicidal lamps.
The form of the transfer window is different in the price difference; the transfer window is divided into three categories.
Conventionally, as mentioned above, there are also air shower transfer windows and 100-level laminar flow transfer windows. These two transfer windows are often expensive compared to ordinary transfer windows because they also need to be matched with air showers, circuits, and filtration systems. Two times more; the interlocking form of the transfer window is another major factor determining the price; the transfer window interlocks are divided into two types: mechanical interlock: control interlock with mechanical mode, features: cheaper price, simpler maintenance However, the disadvantage is that if it is not in accordance with the use specification, it will cause interlocking failure; electronic interlock: control interlock with circuit control mode, features: the price is relatively expensive, the maintenance is more complicated, but the failure rate is lower.
Precautions
1. Since the transfer window is interlocked, when the door on one side cannot be opened smoothly, it is caused by the fact that the door on the other side is not closed. Do not forcefully open it, otherwise the interlock device will be damaged.
2. When the material is from low level to high clean level, the surface of the material should be cleaned.
3. When the interlocking device of the transfer window cannot work normally, it should be repaired in time, otherwise it cannot be used.
4. Always check the operation of the UV lamp and replace the UV lamp regularly.
5. Do not store any materials or debris in the transfer window.
Shanghai Sujing Industrial Co., Ltd.
If you have any needs, you can always pass with me, thank you very much for your support to Sujing, look forward to working with you.
have a pleasant workday!
Thank you & Best regard !
SUJING—JINGHUA
Sweet corn. The light green outer leaves of sweet corn are yellow grains, but also purple and yellow. The grains are small and round, the skin is thin and soft, tender, sweet and delicious.Contains carotene, zeaxanthin, with the effect of eye protection.
Sweet corn is most often boiled into soups. It is a favorite soup for children and adults, whether it is made into a clear corn soup with ribs or pureed with cream.
Corn is also a good choice for consumption during weight loss because of its high available energy. The metabolic energy of corn is 14.06 MJ/kg, with the highest being 15.06 MJ/kg, the highest of the cereal feeds. This is mainly due to the fact that there is very little crude fibre in corn, only 2%, while the nitrogen-free leachate is up to 72% and the digestibility is up to 90%; on the one hand, corn has a high crude fat content, between 3.5% and 4.5%.
So how do you cook a sweet corn?
1. Leave the leaves
If you strip the leaves off, the corn will lose nutrients and flavor when it cooks, so it's best to leave two thin leaves to make it easier to cook and have a nice aroma.
2. Soak
Soak the corn in cold water for 20 to 30 minutes before boiling, then boil it on high heat to give it a bit more chew.
3. Add salt
When the water is boiling, add a little salt to amplify the sweetness of the corn.
Corn Cob,Fresh Corn Cob,Ready Sweet Corn,Single Packed Sweet Corn Cob
Jilin Province Argricultural Sister-in-law Food Co., Ltd. , https://www.nongsaocorn.com