The technical and economic indicators of the screening process are vibration screening efficiency and productivity. The former is the quality indicator and the latter is the quantity indicator. There is a relationship between them, and it is also related to many other factors that determine the outcome of screening. The factors affecting the screening process can generally be as follows:
1. The vibrating screen makes the particles and the screen surface move vertically, so the screening efficiency is high and the production capacity is large. The relative movement of the particles and the screen surface is mainly a rod sieve, a plane vibrating screen, a cylinder sieve, etc. which are parallel movement, and the screening efficiency and productivity are low.
For a given material, the productivity of the sieve and the efficiency of the screening are determined by the size of the mesh. The productivity depends on the width of the screen surface, and the productivity of the screen surface is high. The screening efficiency depends on the length of the screen surface, and the screening length is high. The general aspect ratio is 2.
The larger the effective sieve area (i.e., the ratio of the mesh area to the entire screen area), the higher the productivity per unit area and the screening efficiency.
The larger the mesh size, the greater the productivity of the unit sieve surface and the higher the screening efficiency.
Second, the impact of production conditions
When the load of the sieve is large, the screening efficiency is low. To a large extent, the peace rate of the sieve depends on the size of the mesh and the overall screening efficiency; the larger the mesh, the lower the efficiency of the screening, the higher the productivity.
Feed uniformity is of great significance to the screening process.
The inclination of the sieve should be appropriate and generally determined by experimentation. Then there is the amplitude and vibration of the sieve, which is related to the structural properties of the sieve. Within a certain range, increasing the vibration can improve the screening index.
Third, the physical properties of the material being screened
It includes the particle size composition of the material itself, humidity, mud content and shape of the particles.
When the fines content of the material is large, the productivity of the sieve is also large. When the humidity of the material is large, the screening efficiency generally decreases. However, the larger the mesh size, the smaller the influence of moisture, so for the wet material with a large moisture content, in order to improve the screening process, it is generally possible to adopt a method of increasing the mesh hole or using wet screening. The material contains a large amount of mud (when the mud content is greater than 8%) should be wet screening, or pre-washed.
In short: the problems that occur in the use of vibrating screens, various materials, various environments, various use of staff have a lot of factors.
Sterilization Pouch
Sterilisation Pouch provide storage for sterile goods. Sterilisation Pouchs, like Sterilization bags and Sterilization foil, award a long shelf life for the sterile items and are equipped with a Coloured Indicator Tape that displays successful sterilization via a colour change. The sterilization foils are normally found on rolls and can be cut as need, which provides economic advantages. Bag sealers seal the instruments in packaging to prevent subsequent contamination. We also offer self-adhering sterilization bags in our assortment, so that the use of bag sealers or tape is unnecessary. All packaging is available in various sizes so that you can find the proper sterilization packaging to meet your requirements.
Sterilisation Pouch,Sterilization Pouches,Autoclave Pouches,Autoclave Bags
NINGBO YINGMED MEDICAL INSTRUMENTS CO.,LTD , https://www.chinayingmed.com
