(1) The bearing of the box should be filled with lubricating grease in time. After running for 500 hours, replace the grease once. (The grease should be added to the new machine before operation. The oil should be changed after 200 hours of operation.) (2) Grease the other bearing parts regularly. (3) Screws, screw sleeves and other consumables are strictly prohibited during the dismantling process. Hard objects are not allowed to be placed on the expanding chamber. (4) Expanded raw materials should be cleaned to prevent foreign objects such as metals from entering the machine and damaging the parts. (5) Check the quality of the extruder at any time and pay attention to replacing the wearing parts. (6) Keep the area around the equipment clean. (7) When the machine is used for a long time without using or replacing the expanded material, the materials in the expanding chamber should be cleaned to avoid agglomeration, mildew or cross-contamination between the materials. (8) Since wearing parts near the discharge port wear relatively quickly, wearing parts close to the feed port end are less worn, so when the wearing parts are replaced, they should be replaced from the discharge end in sequence. part.
An Extract is a substance made by extracting a part of a raw material, often by using a solvent such as ethanol or water. Extracts may be sold as tinctures, absolutes or in powder form. The majority of natural essences are obtained by extracting the essential oil from the blossoms, fruit, roots, etc., or the whole plants, through four techniques.
Now this is used in medicine area to help to get the pure substance of the herb. This kind shows several most popular extracts in the market.
Extract
Plant Extract,Herbal Extract,100% Natural Extract,Flower Extract
Drotrong Chinese Herb Medicines Co.,Ltd. , https://www.drotrongherb.com