Pleurotus ostreatus indoor bed planting technology

(2) Management of fruiting period: After the mycelium is overgrown with culture material, the mushroom house door and window and plastic film are opened at the lowest temperature every day for 1 hour, and then covered, so that the temperature difference of the material surface can be increased and the formation of fruit bodies can be promoted. It is also necessary to spray water according to the humidity so that the relative humidity of the indoor air is adjusted to more than 80%. To achieve a physiologically mature mycelium, encounter the appropriate temperature, humidity, air and light, it will kink into a lot of gray buds of grain buds. At this time can be sprayed to the space, the relative humidity of the indoor air is maintained at about 85%, do not spray water on the material surface, so as not to affect the development of bacterial buds, causing the death of young mushrooms. At the same time, the plastic film should be supported so that it is both ventilated and moisturized, and the room temperature can be maintained at 15-18°C. After the bacterial buds are formed, they grow rapidly, and after 2 to 3 days of stipe extension, the top of the original cap has grayish black or brownish oblate, the covered film is lifted off, and a small amount of water can be sprayed on the material surface to keep the indoor air. Relative humidity is about 90%. Usually sprayed 2-3 times a day, the temperature is maintained at about 15 °C.

Piston Rod

it is full range of piston rod for the following type :

Piston Rod,Piston Rod Parts,Hydraulic Cylinder Piston Rod,Automobile Cylinder Piston Rod Parts

ZhouShan HeCheng Machinery Co., LTD. , https://www.hcmarineparts.com